PC/PMMA/PS Infrared Transparent Material
 banner_

PC/PMMA/PS Infrared Transparent Material

Infrared-Transmitting PC/PMMA/PS Plastic Granules

1) They exhibit high transmittance and low absorption in the 600–950 nm infrared range, effectively allowing infrared light to pass through while minimizing energy absorption.

2) These infrared-transmitting PC/PMMA/PS materials are capable of transmitting infrared light within specific spectral ranges (typically 3–5 μm or 8–12 μm).

3) Materials that balance visible light blocking, mechanical strength, and environmental durability.

4) Key specifications include infrared transmittance, cut-off wavelength, and optical uniformity, catering to the wavelength requirements of various infrared optical systems.

Properties Testing Method Testing Condition Unit Standard Value
Melt Flow Rate GB/T3682.1-2018 300℃/1.2kg g/(10min) 13±2
Molding Shrinkage GB/T1041-2008   % 0.6-0.8
Elongation At Break GB/T1040.1-2018 50mm/min % ≥ 105
Tensile Modulus GB/T1040.1-2018 50mm/min Mpa ≥2100
Yield Stress GB/T1040.1-2018 50mm/min Mpa ≥45
IZOD Notch Impact Strength GB/T1843-2008 23℃ kj/m2 ≥ 25
Heat Distortion Temperature GB/T1634.1-2019 1.8Mpa 125 
Scorching Wire GB/T5169.10-2017 2.0mm ,650℃ S ≤ 30
infrared ray JJG 178-2007 Thickness 1.5mm IR940nm ≥91
Light Transmittance GB/T 2410-2008   % 2.2 ±0.5
Haze GB/T 2410-2008 Thickness 1.5mm % 3.5 ±0.5
Density GB/T1033.1-2008   g/cm3 1.2 
Product Appearance   Visual inspection / Even granulation

I. Security Surveillance & Machine Vision

Infrared filter covers for outdoor cameras, front lens windows, night-vision camera housing windows, dashcam and backup camera protective covers, IR motion sensor housings, anti-theft detector panels, light-transmitting panels for grating sensors, lens guards for field night-vision equipment, etc.

 

II. Consumer Electronics & Smart Devices

Decorative covers for smartphone rear cameras, IR remote control windows for phones, light-transmitting lenses for smartwatch/fitness tracker heart rate and blood oxygen monitoring, IR transmission windows for laptops, IR positioning components for VR devices; IR window panes for home appliance remote control receivers; IR sensor panels for wireless Bluetooth speakers, etc.

 

III. Automotive Industry

Light-transmitting areas for IR sensor buttons on center consoles, IR ambient light windows for dashboards, 360-degree panoramic camera systems, IR protective covers for millimeter-wave radar, automatic headlight light sensors, IR filter covers for rain sensors, IR motion sensor windows for new energy charging piles, bases for anti-glare IR lenses in rearview mirrors, IR light-guiding components for interior ambient lighting, IR sensor light-transmitting strips for door handles, etc.

 

IV. Smart Home & Appliances

IR remote control receiver windows for appliances; IR motion-sensing night lights, IR sensor panels for automatic doors, IR recognition windows for smart locks, etc.

 

V. Biometrics & Identity Verification

Iris recognition lens filters, light-transmitting panels for fingerprint scanners, IR fill-light filters for facial recognition devices, protective windows for outdoor facial recognition turnstiles, light-transmitting housing layers for facial recognition units at construction sites or access control points, etc.

 

VI. Medical Aesthetics & Health Equipment

IR filter lenses for IPL (Intense Pulsed Light) skin rejuvenation devices, laser beauty devices, and skin analyzers; light-transmitting panes for patient monitor blood oxygen probes, IR optical windows for portable health checkup devices; IR diagnostic lenses for ophthalmology, IR sensor housing windows for medical equipment, IR emitter protective covers for rehabilitation and physiotherapy devices, etc.

 

VII. Industrial Inspection & Instrumentation

Optical windows for gas analyzers, infrared thermometers, and spectrometers; filters for machine vision inspection on production lines; lenses for photoelectric material-counting sensors; protective lenses for laser rangefinders and 905nm LiDAR systems, etc.

 

VIII. Communications and Outdoor Equipment

Infrared sensing windows for 5G base station maintenance; infrared lens covers for drone gimbals; infrared detection windows for field exploration equipment; infrared night-vision front covers for action cameras, etc.

Q: How can cracking or brittle failure during injection molding be resolved?

A: We offer formulation adjustments to enhance toughness and reduce internal stress, alongside recommendations for optimized injection molding processing parameters.

 

Q: Do the products hold relevant industry certifications?

A: Our materials meet industry standards such as UL flame retardancy, ISO medical compliance, automotive specifications, weather resistance, and antistatic properties. We provide comprehensive physical property reports and test certificates to satisfy market entry requirements for sectors including home appliances, automotive, medical, and new energy.

 

Q: Are the materials suitable for injection molding and extrusion?

A: All modified pellets are designed with flow characteristics compatible with standard injection molding machines and extruders. They offer stable molding, low shrinkage, and resistance to delamination or cracking, making them suitable for manufacturing housings, structural components, optical parts, sheets, and more.